Rosemount measurement by EMERSON
For over 45 years, Rosemount has been recognized as the world leader in the design and manufacture of instrumentation, including a complete line of pressure, temperature, flow, and level products. The base for Rosemount’s success is a commitment to product quality and reliability in the most demanding industries environments
Remember you can always order ROSEMOUNT products here
Products
Thermocouples / RTDs
Common, simple, reliable temperature sensors that rely on either a millivolt signal from two dissimilar metals (thermocouples) or the resistance of a highly pure conductor (RTDs), both of which correlate highly to temperature
Temperature Transmitters / Transducers
Provides the interface between a temperature sensor, such as a thermocouple or RTD, and the measurement/control device allowing the sensor’s signal to travel further before it distorts and creates inaccuracy.
Magmeters / Electromagnetic Flow Meters
Uses energized coils outside the flow tube to create a magnetic field which creates voltage proportional to the velocity of a conductive liquid passing through the field at a right angle
Differential Pressure Flow Meters
Measure the velocity of fluids by reading the pressure loss across a pipe constriction. These meters can contain laminar plates, an orifice, nozzle, or Venturi tube to create an artificial constriction. Highly sensitive pressure sensors measure the pressure before and after the constriction.
Vortex Flow Meters
Uses an obstruction in the flow stream to create downstream vortices which form alternating low and high pressure zones that oscillate at particular frequencies directly proportional to the velocity of the fluid.
Pressure Sensors / Transmitters / Transducers
Converts applied pressure into a measurable electrical signal which can be used for display or to trigger a control function.
Level Switches
Point level measurement instruments used to mark a single, preset level condition such as high or low level condition that would trigger an alarm or switch.
Level Transmitters
Provides continuous level measurement over the range of the system rather than at a single point and produce an output signal that directly correlates to the level within a vessel.